Everfine
Everfine
Everfine
Home Products LED Driver/Electronic Rectifier Analyzer HB-4B Electronic Ballast Test System (for HID lamps)
HB-4B Electronic Ballast Test System (for HID lamps)
Direct display of the main input and output parameters of the HID lamp electronic ballast
Typical application scenarios
It is mainly used for the analytical measurement of the input and output performance of the HID lamp electronic ballast.
Everfine
Main characteristics
The digital tube directly displays the main input and output parameters of the HID lamp electronic ballast. Standard with PC software, you can connect to the computer to display the measured data and waveform.
Technical Specifications
ModelHB-4B
Input Characteristic Test
Test FunctionsInput voltage, current, active power, power factor, frequency, voltage/current Total Harmonic Distortion (THD), relative values and RMS values of 0th to 39th harmonics, harmonic spectrum, and actual voltage/current waveforms.
Harmonic AnalysisVoltage/Current Total Harmonic Distortion (THD), relative values and RMS values of 0th to 39th harmonics
Input Voltage Measurement Range3V~300V
Input Current Measurement Range0.05A~1.00/10.00A
Measurement Active Power Range5W-3000W
Input Measurement Accuracy0.1%reading+0.1%range+1digit
Output Characteristics Test
Startup Output Characteristics TestMeasures the startup output characteristics of the ballast, specifically the variation process of lamp voltage RMS, lamp current RMS, and lamp power within 0 to N seconds (with N configurable from 60 to 600 seconds) after the low-frequency or high-frequency electronic ballast starts up.
Steady-State Output CharacteristicsLow-frequency and high-frequency steady-state output characteristics at the output terminal of the HID ballast. The low-frequency output can withstand an impulse voltage of 10 kV.
EverfineEverfine

QR code

Everfine

Follow us

EverfineEverfine

Online
consultation

Everfine

WeChat Scan Code Contact

EverfineEverfine

Return
top